top of page

SYMMETRY GROUP

Public·22 members

Download and Install Cleanmem Pro 2.4.3 Serial Numberl in Easy Steps


Cleanmem Pro 2.4.3 Serial Numberl: How to Download, Install, and Use This Powerful Memory Cleaner




Do you want to optimize your system performance and speed up your PC? Do you want to prevent memory leaks and reduce memory usage by applications? Do you want to avoid memory being pushed to the page file and causing disk fragmentation? If you answered yes to any of these questions, then you need Cleanmem Pro.




Cleanmem Pro 2.4.3 Serial Numberl


DOWNLOAD: https://www.google.com/url?q=https%3A%2F%2Furlcod.com%2F2ul6De&sa=D&sntz=1&usg=AOvVaw3FDZjXojXmo75ra3HJU99u



Introduction




In this article, we will show you how to download, install, and use Cleanmem Pro 2.4.3, a powerful memory cleaner that can help you improve your system performance and stability. We will also show you how to get a serial number for this program, which is required for activation and full functionality.


What is Cleanmem Pro?




Cleanmem Pro is a software that can scan and clean your system memory from unnecessary data and processes that consume your RAM. It can also clear your system file cache, which can grow large over time and slow down your system. Cleanmem Pro works by calling a Windows API function that tells Windows to clean up the memory of all processes, without forcing any memory out of physical RAM. This way, it does not affect your system performance or stability, but rather enhances it.


Why do you need Cleanmem Pro?




Cleanmem Pro can help you solve many common problems that are caused by high memory usage, such as:



  • Slow system performance and responsiveness



  • Programs crashing or freezing



  • Blue screen of death or other errors



  • High disk activity and fragmentation



  • Low available memory for new applications



Cleanmem Pro can also help you extend the life of your SSD (solid state drive), by reducing the amount of data that is written to it from the page file. The page file is a virtual memory space that Windows uses when it runs out of physical RAM. However, writing data to the SSD can wear it out faster than a normal hard drive. By using Cleanmem Pro, you can minimize the use of the page file and save your SSD from unnecessary wear and tear.


How to get Cleanmem Pro 2.4.3 serial number?




Cleanmem Pro is not a free software, but rather a paid one that requires a serial number for activation and full functionality. The serial number is a unique code that identifies your license and allows you to use the program without any limitations or restrictions.


To get a serial number for Cleanmem Pro 2.4.3, you have two options:



  • You can buy it from the official website of Cleanmem Pro, where you can choose between different payment methods and currencies. The price of a single license is $18.99, which includes lifetime updates and support.



  • You can download it from a third-party website that offers free or cracked serial numbers for various software programs. However, this option is not recommended, as it may expose you to malware, viruses, or legal issues. Moreover, you may not get the latest version of the program or the updates and support that come with it.



Therefore, we suggest that you opt for the first option and buy a serial number from the official website of Cleanmem Pro, as it is more safe, reliable, and convenient.


How to download and install Cleanmem Pro 2.4.3




Once you have obtained a serial number for Cleanmem Pro 2.4.3, you can proceed to download and install the program on your system. Here are the steps to follow:


Step 1: Visit the official website of Cleanmem Pro




The official website of Cleanmem Pro is https://www.pcwintech.com/cleanmem, where you can find more information about the program, its features, and its benefits. You can also access the download page from here, or by clicking on the button below:



Step 2: Click on the download button and save the file




When you click on the download button, you will be redirected to a page where you can choose between two versions of Cleanmem Pro: the installer version and the portable version. The installer version is recommended for most users, as it will install the program on your system and create shortcuts and registry entries for easy access. The portable version is suitable for advanced users who want to run the program from a USB drive or a different location without installing it.


For this guide, we will use the installer version, which is a file named CleanMem_Pro_Setup.exe. Click on the download link and save the file to your preferred location on your system.


Step 3: Run the setup file and follow the instructions




After downloading the file, locate it on your system and double-click on it to run it. You may see a security warning from Windows asking you to confirm that you want to run this file. Click on Run or Yes to proceed.


You will then see a welcome screen from the Cleanmem Pro setup wizard. Click on Next to continue.


You will then see a license agreement screen, where you need to read and accept the terms and conditions of using Cleanmem Pro. Check the box that says I accept the agreement and click on Next.


You will then see a screen where you can choose the destination folder for installing Cleanmem Pro. The default location is C:\Program Files (x86)\CleanMem Pro\, but you can change it by clicking on Browse and selecting a different folder. Click on Next when you are done.


You will then see a screen where you can choose whether to create a desktop shortcut and a start menu folder for Cleanmem Pro. Check or uncheck the boxes according to your preference and click on Next.


You will then see a screen where you can review your settings before installing Cleanmem Pro. Click on Install to start the installation process.


The installation process will take a few seconds, during which you will see a progress bar and some information about Cleanmem Pro. When the installation is complete, click on Finish.


Step 4: Enter the serial number and activate the program




The first time you run Cleanmem Pro, you will see a screen asking you to enter your serial number. This is the code that you obtained from the official website or another source. Enter it in the box and click on Activate.


If your serial number is valid, you will see a message saying that your activation was successful and that you can now use Cleanmem Pro without any limitations or restrictions. Click on OK.


If your serial number is invalid, expired, or already used, you will see an error message saying that your activation failed and that you need to contact support or buy a new serial number. Click on OK and try again with a different serial number.


How to use Cleanmem Pro 2.4.3




Cleanmem Pro 2.4.3 is very easy to use, as it has a simple and the same folder where you installed Cleanmem Pro. You can open this file with any text editor, such as Notepad or WordPad.


To enable the system file cache clearance, you need to change the value of the parameter ClearSystemCache from 0 to 1. To disable it, you need to change it back to 0.


To enable the log files creation, you need to change the value of the parameter CreateLogFiles from 0 to 1. To disable it, you need to change it back to 0.


After editing the file, you need to save it and restart Cleanmem Pro for the changes to take effect.


Step 4: Install and edit the task scheduler to automate the memory cleaning process




Cleanmem Pro can run automatically in the background and clean your memory at regular intervals that you can set in the advanced settings. However, if you want more control and flexibility over when and how Cleanmem Pro runs, you can use the task scheduler feature.


The task scheduler is a Windows tool that allows you to create and manage tasks that run programs or scripts at specific times or events. You can use it to schedule Cleanmem Pro to run at different times or conditions, such as when your system starts, when you log on, when your system is idle, or when a certain amount of time has passed.


To install the task scheduler for Cleanmem Pro, you need to run a file named CleanMem Task Scheduler.exe, which is located in the same folder where you installed Cleanmem Pro. You will see a screen with some instructions and options. Click on Install Task to create a default task that will run Cleanmem Pro every 15 minutes.


To edit the task scheduler for Cleanmem Pro, you need to open the Windows task scheduler tool, which you can find by searching for taskschd.msc in the start menu or the run dialog box. You will see a list of tasks that are created and managed by Windows and other programs. Look for a task named CleanMem, which is located under the folder named CleanMem Pro. Right-click on this task and select Properties.


You will see a screen with several tabs and options that you can adjust according to your needs. Here are some of the most important ones:



  • General: This tab allows you to set the name, description, security options, and compatibility mode of the task.



  • Triggers: This tab allows you to set when and how often the task will run. You can add, edit, or delete triggers based on time, event, or condition.



  • Actions: This tab allows you to set what program or script will run when the task is triggered. You can add, edit, or delete actions based on parameters, arguments, or conditions.



  • Conditions: This tab allows you to set additional conditions that must be met for the task to run. You can enable or disable conditions based on power, network, idle time, or battery level.



  • Settings: This tab allows you to set some general settings for the task, such as whether it will run if missed, whether it will stop if it runs too long, whether it will restart if it fails, and whether it will allow parallel instances.



  • History: This tab shows you a log of when and how the task ran in the past. You can use it to troubleshoot any issues or errors that may occur.



You can experiment with different options and see how they affect your memory cleaning process. You can always restore the default settings by clicking on Restore Defaults at the bottom of each tab. When you are done with editing your task, click on OK to save your changes and close the properties screen.


Step 5: Monitor the memory usage and performance of your system




Cleanmem Pro provides you with a simple and effective way to monitor your memory usage and performance of your system. You can use either the monitor window or the log files to see how much memory you have saved and how your system has improved after using Cleanmem Pro.


The monitor window is a small window that shows your current memory usage and performance on your screen. You can customize its appearance, position, size, transparency, and refresh rate in the monitor settings tab. You can also enable or disable it by right-clicking on the system tray icon and selecting Show/Hide Monitor.


The log files are text files that record every memory cleaning operation that Cleanmem Pro performs. You can find them in the same folder where you installed Cleanmem Pro, under a subfolder named Logs. You can open them with any text editor, such as Notepad or WordPad. You can also enable or disable them by editing the CleanMem.ini file and changing the value of the parameter CreateLogFiles.


By using these too